Gateway ALR 9000 ID Setup, Accept, ID SETUP, Reload ID, Save Setup, BIOS Setup Program, •ID Selected displays the LCD ID number

ID Setup

To establish communication between the LCD and host IFM, the LCD must maintain an ID number that matches the ID number on the system board. The ID numbers are displayed in the ID SETUP submenu (see) as follows:

•ID Selected displays the LCD ID number.•ID Available displays the ID number on the system board.

In the event these ID numbers do not match, communication will cease. You must restore communication by performing the following:

1.Press the Reload ID button to automatically reload an LCD ID number that matches the current ID number on the system board.

2.Press the Save Setup button which will display a submenu. Then, press the Accept button to confirm the change you just made.

If you need to change the ID number on the system board, you must do so through the BIOS Setup Program.

32 Gateway ALR 9000 User’s Guide