Gateway ALR 9000 Common Problems, Problem, Table 2:, Solution(s), Probable Cause

Common Problems

Table 2:

Problem	Probable Cause	Solution(s)
The system will	The system is not con-	Check the power cable and
not power ON.	nected to an AC outlet.	make certain it is connected to
		an AC power source.
	The voltage-selection	Make certain the voltage-selec-
	switch is not set correctly.	tion switch reflects the correct
		power source.
The system does	The date and time param-	Enter the BIOS Setup program
not display the	eters in BIOS Setup may	and correct the date and time
date and time	be set incorrectly.	settings.
correctly or at all.
	The backup battery may	Contact Technical Support for
	need to be replaced.	assistance.
The Power LED is	ECC memory failure has	Press the Keyboard Inhibit
flashing.	occurred.	Switch IN and then OUT.
		NOTE: If the Keyboard Inhibit
		Switch is already in locked posi-
		tion (IN), you must first unlock it
		(OUT) and then lock it back (IN)
		to reset the ECC memory status
		and the Power LED.
The Power LED	A DIMM was incorrectly	Check the DIMM for proper
continues to flash	installed.	installation
after ECC reset.	A DIMM is not functioning	Replace the faulty DIMM.
	properly.

Common Problems 37