Mouse Port

This port supports any mouse with a miniature circular DIN (mini-DIN) connector.

Keyboard Port

This port supports any keyboard with a miniature circular DIN (mini-DIN) connector.

Serial Port 1

This is a high-speed serial port which uses the First-In-First-Out (FIFO) protocol. If you have a serial mouse, connect it to this port. Other serial devices such as serial printers or modems can also be connected this port.

Serial Port 2

This is a high-speed serial port which uses the First-In-First-Out (FIFO) protocol. Serial devices such as serial printers or modems can also be connected this port.

Power Supply Fault Reset Switch

In the event of a power supply failure, pressing this switch turns off the alarm signal and resets the power supply.

Chassis Keylocks (2)

The rear panel is designed with two loop keylocks in which you can install a padlock each to secure the right and left panels.

Redundant Power Supply Subsystem

Standard equipment includes three hot-pluggable, redundant power supplies (two 350-Watt N+1 modules and one spare). The system can support up to four identical power supply modules which yield a redundant power of 700-Watts.

Note:

If your mouse has a mini- DIN connector, you must connect it to the Mouse Port.

Rear Panel 13