21
Setting up the network
www.gateway.com
For wireless peer-to-peer setup, see “Wireless peer-to-peer setup” on
page 25.
Wired Ethernet setup

To configure the player for a wired Ethernet network:

1Make sure that your computer is on and Media Server is running.
The Media Server icon in the Windows taskbar shows that the program
is running.
If the Media Server icon has a red “x” on it, Media Server is running but
cannot connect to the network. See “Network troubleshooting” on
page 79.
2On the player’s remote control, press STOP, then press SETUP. The Welcom e
to Setup screen opens.
Important Always have Media Server running on your computer
before turning on the player.
For help during network setup, highlight Help, then press
ENTER.