50
Chapter 3: Customizing
www.gateway.com
Defining the speaker set
Use this setting to identify the type of speakers in your audio setup.

To define your speaker setup:

1On the player’s remote control, press STOP, then press SETUP. The Welcom e
to Setup screen opens.
2Use your remote control’s arrow buttons to highlight Analog, then press
ENTER. The Analog audio setup menu opens.
3Highlight Speaker Set, then press ENTER. The active speakers are listed.
4Highlight each of the following speakers, then press the buttons to
turn them on or off:
Subwoofer
Turns subwoofer output on or off.
Surround
Turns left/right surround speaker output on or off.
Center
Turns center speaker output on or off.
5Highlight Ctr Spkr Size, then press the buttons to select Large or Small
to indicate the relative size of the center speaker.
6Highlight OK, then press ENTER.