
23
Setting up the network
www.gateway.com
2On the player’s remote control, press STOP, then press SETUP. The Welcom e
to Setup screen opens.
3Use your remote control’s arrow buttons to highlight Network, then press
ENTER.
4Highlight Network, then press ENTER to search for an available network.
A list of available networks opens. Names of networks using wireless access
points end with “ACC PT.”
5Highlight one of the detected networks, then press ENTER. The message
“Joining new network please wait” appears, then the message “Successfully
joined [network name]” appears.
6Press ENTER to continue. The main Network menu opens.
The IPaddress appears in the lower-right corner of the screen. To change
the way the IP address is selected, see “Setting the IP address” on page 28 .
To change the player name (as it appears to other players), see “Changing
the player name” on page 29.