29
Setting up the network
www.gateway.com
■Auto IP — Lets the player obtain an IP address for itself.
■Static (Manual) — Lets you set the IP address and Subnet Mask.
5Highlight OK, then press ENTER.
6Press SETUP or RETURN to close the Wel com e t o Se t u p screen.
Changing the player name

To change the name of the player on the network:

1On the player’s remote control, press STOP, then press SETUP. The Welcom e
to Setup screen opens.
2Highlight Network, then press ENTER.
3Highlight Player Name, then use the following buttons to name the player:
■ — Press to move the text insertion point left and right.
■0-9 buttons — Press repeatedly to select the desired character, then
press the button to save the character and move to the next
character.
■CLEAR — Press to erase a character.
4Highlight OK, then press ENTER.
5Press SETUP or RETURN to close the Wel com e t o Se t u p screen.
Important Static IP addresses are numeric addresses that you assign
to uniquely identify your network devices. Only
experienced network users should manually set the
IPaddress.
If you select Static (Manual), press the button to select
“Set,” then manually enter the IP address and Subnet
Mask with the 0 through 9 buttons. Highlight OK, then
press ENTER to save andexit.