CHAPTER 2: Getting Started

If you need to change drive technology, a new column of drives should be populated.

Column/row

1/#

2/#

3/#

4/#

 

 

 

 

 

#/1

-

SAS 2

SATA 3

-

 

 

 

 

 

#/2

-

SAS 6

SATA 7

-

 

 

 

 

 

#/3

-

-

SATA 11

-

 

 

 

 

 

All members of the column should have the same drive type.

Drive start

With two active power supply modules installed (required), all drives start immediately.

Activating the anti-tamper locks

The anti-tamper locks are installed in the drive carrier handles and are accessed through the small cutout in the latch section of the handle.

Drives are supplied with the locks set in the locked position.

Important

You cannot install a drive carrier if its anti-tamper lock is activated before installing it into the enclosure.

To activate the locks:

1Carefully insert the provided lock key into the cutout in the handle.

2Rotate the key clockwise until the indicator is visible in the opening beside the key.

3Remove the key.

4To deactivate the lock, rotate the key counter-clockwise until the indicator is no longer visible in the opening beside the key.

26