CHAPTER 4: Troubleshooting
Warning
Do not remove covers from the power supply modules. There is a danger of electric shock inside.
To remove a power supply module:
1Make sure that you identify the faulty power supply module correctly. The Module Fault LED on the faulty power supply module lights orange.
2Disconnect the power supply cord.
3Push the latch on the power supply module handle to the right, then grip the handle and pull the power supply module out of the enclosure.
Installing a power supply module
Caution
Do not mix power supply modules of different types or makes.
To install a power supply module:
1Check for damage, especially to the rear connector on the power supply module.
Caution
Handle the module carefully and avoid damaging the connector pins. Do not install the module if any pins appear to be bent.
2Slide the module into the enclosure (see “To install a power supply module:” on page 20).
3Push the module until you hear a click as the handle latch engages.
20