CHAPTER 4: Troubleshooting

Drive carrier module

Caution

Observe all conventional ESD precautions when handling modules and components.

Avoid contact with such things as backplane components and module connectors.

Removing a drive carrier module

To remove a drive carrier module:

1Release the carrier handle by pressing the latch in the handle towards the right. The anti-tamper lock must be off.

Caution

Damage can occur to a drive if it is removed while still spinning. We recommend that you perform all steps in the following procedure to ensure that the drive has stopped prior to removal.

2Gently withdraw the drive carrier module approximately 1 inch (25 mm) and wait 30 seconds to let the drive spin down.

3Withdraw the module from the drive bay.

26