DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1.Press F2 during boot to enter the Setup Menu.
2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
|
|
| InsydelH20 Setup Utility |
| Rev. 3.5 | |
Information | Mai | n | Security | Boot | Exit |
|
Boot priority order :
1.IDE0 : TOSHIBA MK2555GSX
2.IDE1 :
3.Network Boot : Atheros Boot Agent
4.USB HDD :
5.USB CDROM :
6.USB FDD :
Item Specific Help
Use <
> or <
> to select a device, then press <F6> to move it up the list, or <F5> to move it down the list. Press <Esc> to escape the menu
F1 | Help | Select | Item | F5/F6 | Change | Values | F9 | Setup | Default |
Es c | Exit | Select | Menu | Enter | Select | F10 | Save | and Exit |
3.Execute the FLASH.BAT batch file to update BIOS. The flash process begins as shown.
4.In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue.
5.Flash is complete when the message Flash programming complete displays.
32 | Chapter 2 |
