CHAPTER 4: Advanced Hardware Setup

10Press F10 to exit BIOS, then press Y to accept the changes. The screen displays the message “Turn off power and reinstall the jumper in Normal mode position.”

11Turn off the computer.

12Disconnect the power cord and follow all anti-static precautions.

13Return the jumper to the Normal position (bridging pins 1-2).

14Close the computer case.

15Reconnect the power cord.

16Turn the computer on. If the jumper is in the correct position and the multiplier is low enough, your computer should start normally.

Setting up multiple monitors

To set up multiple monitors, see the “Customizing” chapter in your online User Guide.

48