Reconnect the power supply cables using your notes from Step 2.
Install the new power supply into the case, then install the three screws to secure the power supply to the case.
Slide the power supply away from the back of the computer, then lift up.
4
5
6
7 Replace the side panel by following the instructions in “Replacing the side panel” on page 54.
www.gateway.com
Replacing the power supply
Tools
You need a Phillips screwdriver to replace the power supply.
To replace the power supply:
1 Remove the side panel by following the instructions in “Removing the side panel” on page 51.
2 Disconnect the power supply cables from all components (such as hard drives, CD or DVD drives, and the system board), noting their locations and orientation. (You will reconnect the cables after you install the new power supply.)
3 Remove the three screws that secure the power supply to the computer.
Screws

69