Replace the front bezel by following the instructions in “Replacing the front bezel” on page 54.
Connect the new card reader cables, using your notes from Step 3.
7
8
9 Replace the side panel by following the instructions in “Replacing the side panel” on page 54.
www.gateway.com
3 Disconnect the memory card reader cables, noting their locations and orientation. (You will reconnect the cables after you install the new memory card reader.)
4 Remove the thumbscrew holding the card reader in the drive bay.
Thumbscrew
5 Slide the drive release latch back to release the card reader, then slide the card reader out of the case.
6 Slide the new card reader into the bay from the front of the case, then slide the drive release latch forward to lock the drive into place. You do not need to replace the thumbscrew because it was originally installed for shipping purposes.
Important
The color and shape of your replacement reader's front cover may vary from your original reader.

61