
CHAPTER 4: Upgrading Your Computer
6Remove the two drive retention screws.
Drive retention screws
7Slide the drive forward and out of the drive bay.
8Slide the new drive into the drive bay, line up the screw holes on the drive bay withthe screwholesonthe drive, then replace the two drive retention screws.
9Reconnect the drive cables using your notes from Step 4, or according to the manufacturer’s instructions.
10Replace the front bezel by following the instructions in “Replacing the front bezel” on page 39.
11Replace the side panel by following the instructions in “Replacing the side panel” on page 40.
46