
CHAPTER 4: Upgrading Your Computer
9If your replacement system board does not include a processor remove the processor from the old system board by following the directions in “Replacing the heat sink and processor” on page 51, then install it and the heat sink into the new system board by following the directions in the same procedure.
10Slide the power supply back into the case, then install the four screws to secure the power supply to the case.
11Connect all power and data cables using your notes from Step 4.
12Reinstall any memory modules you removed previously.
13Reinstall any expansion cards you removed previously.
14Replace the side panel by following the instructions in “Replacing the side panel” on page 40.
58