
CHAPTER 4: Upgrading Your Computer
4If you are replacing an expansion card, remove the old card. You can slightly seesaw the card
Caution
Do not touch the contacts on the bottom part of the expansion card. Touching the contacts can cause electrostatic damage to the card.
5Install the new card into the expansion slot. You can slightly seesaw the card
6If you have just replaced an expansion card, reconnect the expansion card cables (if any) using your notes from Step 2. If you have added a new expansion card, connect its cables according to its user guide.
7Press the card retention lever back into place.
8Replace the side panel by following the instructions in “Replacing the side panel” on page 40.
54