www.uk.gateway.com

Replacing the memory card reader

Tools

You need a Phillips screwdriver to replace the memory card reader.

To replace the memory card reader:

1Remove the side panel by following the instructions in “Removing the side panel” on page 37.

2Remove the front bezel by following the instructions in “Removing the front bezel” on page 38.

Important

The color and shape of your replacement card reader’s front cover may vary from your original card reader.

3Slide the top bezel toward the front of the computer about 3/4 inch, then remove it from your computer.

4Remove the two screws that secure the card reader to the computer.

Screws

47