CHAPTER 4: Upgrading Your Computer

4Replace the PCI riser card by sliding it back into place.

5Replace the back panel by following the instructions in “Replacing the back panel” on page 36.

Installing a full-height expansion card

To install a full-height expansion card:

1Remove the back panel by following the instructions in “Opening the case” on page 35.

2Remove the PCI riser card by pulling on its green handle.

Caution

Do not touch the contacts on the bottom part of the expansion card. Touching the contacts can cause electrostatic damage to the card.

3Press the two tabs on the card retention lever together, then lift the card retention lever out of the way.

48