12 Replace the back panel by following the instructions in “Replacing the back panel” on page 36.
Replace the processor fan by following the instructions in “Replacing the processor fan” on page 37.
Replace the heat sink and tighten the four captive screws.
Slide the new system board into place, then replace the seven screws you removed previously.
Slide the system board to the right until it slides free from the case, then remove it completely from the case.
7
8
9
10
11 Replace the riser card assembly by following the instructions in “Adding or replacing an expansion card” on page 47.
www.gateway.com
6 Remove the seven screws that secure the system board to the case.
Screws
Screws

53