How to delay the start of cleaning
1Press the SELF CLEAN pad.
2Using the number pads, enter the desired clean time.
3Press the DELAY START pad. The earliest start time you can set will appear in the display.
4Using the number pads, enter the time of day you want the clean cycle to start.
5Press the START pad.
The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open the door.
NOTE: On double oven models, you can set a delay clean in both ovens at the same time. The second oven set will automatically delay the start of cleaning until the end of the first oven’s clean cycle.
To recall the start time of the second oven set, press the DELAY START pad on the controls for the second oven.
After a clean cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap- filled steel wool pad and rinse thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
•You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
•While the oven is
•If the shelves become hard to slide, wipe the shelf supports with cooking oil.
29
