Using the timer
Special features of your oven control
Tones at the end of a timed cycle
1 Press the KITCHEN TIMER ON/OFF pad.
2 Press the number pads to set the time. For example, to enter 2 hours and 45 minutes, touch 2, 4 and 5 in that order.
If you make a mistake, press the KITCHEN TIMER
ON/OFF pad and begin again.
3Press the START pad.
After pressing the START pad, “SET” disappears; this tells you the time is counting down, although the display does not change until one minute has passed.
4When time is up, the oven control signals until you press the KITCHEN TIMER ON/OFF pad. Display then shows the time of day.
NOTE: The minute timer is independent of all the other functions and it does not control the oven. The CLEAR/OFF pad does not affect the timer.
Your new touch pad control has additional features | The special feature modes can only be activated |
that you may choose to use. | while the display is showing the time of day |
They remain in the control’s memory until the | clock. |
| |
steps are repeated. When the display shows your | The following are the features and how you may |
choice, press the START pad. The special | activate them. |
features will remain in memory after a power |
|
failure. |
|
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6 second beep may be canceled. To cancel the 6 second beep:
1Press the BAKE and BROIL HI/LO pads (on double oven models use the upper oven
controls) at the same time for 3 seconds until the display shows “SF.”
2Press the KITCHEN TIMER ON/OFF pad. The display shows “CON BEEP” (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows “BEEP.” (This cancels the one beep every 6 seconds.)
3Press the START pad.
NOTE: On double oven models this cancels the end of
cycle tone for both ovens. | 9 |