PROBLEM | POSSIBLE CAUSE |
OVEN WILL NOT | • The oven temperature is too high to set a |
SELF CLEAN | Allow the oven to cool to room temperature and reset the controls. |
| • Oven controls improperly set. See the Using the |
| section. |
| • The probe is plugged into the outlet in the oven. Remove the probe |
| from the oven. |
|
|
“CRACKING” OR | • This is normal. It is the sound of the metal heating and cooling |
“POPPING” SOUND | during both cooking and cleaning functions. |
|
|
EXCESSIVE SMOKING | • Excessive soil. Press the CLEAR/OFF pad. Open the windows to rid |
| the room of smoke. Wait until the LOCKED DOOR light goes off. |
| Wipe up the excess soil and reset the clean cycle. |
|
|
OVEN DOOR WILL | • The oven is too hot. Allow the oven to cool below locking |
NOT OPEN AFTER | temperature. |
A CLEAN CYCLE |
|
|
|
OVEN NOT | • Oven controls improperly set. See the Using the |
CLEAN AFTER | section. |
A CLEAN CYCLE | • Oven was heavily soiled. Clean up heavy spillovers before starting the |
| |
| clean cycle. Heavily soiled ovens may need to |
| longer period of time. |
|
|
“LOCK DOOR” | • The |
FLASHES IN | Close the oven door. |
THE DISPLAY |
|
|
|
LOCKED DOOR | • The oven door is locked because the temperature inside the oven has |
LIGHT IS ON WHEN | not dropped below the locking temperature. Press the CLEAR/OFF |
YOU WANT TO COOK | pad. Allow the oven to cool. |
|
|
CONTROL SIGNALS | • You forgot to enter a bake temperature or cleaning time. Press the |
AFTER ENTERING | BAKE pad and desired temperature or the SELF CLEAN pad and |
COOKING TIME OR | desired clean time. |
DELAY START |
|
|
|
| • You have a function error code. Press the CLEAR/OFF pad. Allow |
OR LETTER” FLASH | the oven to cool for one hour. Put the oven back into operation. |
IN THE DISPLAY | • Disconnect all power to the oven for 30 seconds and then reconnect |
| |
| power. If the function error code repeats, call for service. |
|
|
DISPLAY GOES | • A fuse in your home may be blown or the circuit breaker tripped. |
BLANK | Replace the fuse or reset the circuit breaker. |
| • The clock is in the |
| Timer section. |
|
|
DISPLAY FLASHES | • Power failure. Reset the clock. |
|
|
35