2.Press the program/mute button to save. You will hear a confirmation tone, and the selected contrast level displays for two seconds, then SET AREA CODE shows in the display.

SET AREACODE

- - -

NOTE: Press the EXIT button once to keep the previous setting and return to standby mode.

AREA CODE

If you enter a 3-digit area code in the area code menu, your local area code does not appear in Caller ID records. Instead, you see only the local seven digit number. Calls you receive from outside your local area code display as the full ten-digit number.

This setting may be made with the base and the handset.

1.Use the touch-tone pad on your base or handset to enter your three digit area code.

2.Press the program/mute button to save. You will hear a confirmation tone and the area, code displays for two seconds, then SET RINGER TONE 1 2 3 4 5 6 shows in the display.

AREACODE - 317

SET RINGER TONE

1 2 3 4 5 6

NOTE: Press the EXIT button once to keep the previous setting and return to the standby mode.

14

Page 14
Image 14
GE 21015 manual SET Areacode, Areacode SET Ringer Tone