![](/images/new-backgrounds/1309960/30996063x1.webp)
STORING A REDIAL NUMBER
1.Make sure the phone is OFF (not in talk mode).
2.Press the mem button.
3.Press any number key
memory location, or press the or button on the handset or base to select the memory location.
4.Press the mem button and ENTER NAME shows in the display.
5.Use the
6.Press the redial button to display the redial number.
7.Press the mem button again to confirm.
NOTE: If the redial number has more than 20 digits, the redial number cannot be stored in base or handset memory.
INSERTING A PAUSE IN THE DIALING SEQUENCE
If a pause is needed to wait for a dial tone press the # pause button to insert a delay in dialing sequence of a stored telephone number (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence.
REVIEWING, CHANGING OR DELETING STORED NUMBERS
TO REVIEW:
1.Make sure the phone is OFF (not in talk mode).
2.Press the mem button.
3. Press the or button on the handset or base to scroll through the stored numbers. Or use the
# 0 3
MEMO
317 - 123 - 4567
PETER CHAN
32