Replacing the light bulbs.

Turning the control to the 0 (off) position does not remove power to the light circuit.

Refrigerator Lights (on some models) CAUTION: Light bulbs may be hot. Unplug the refrigerator.

To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back.

Rotate the shield down and then forward to release the tabs at the front of the shield.

After replacing with an appliance bulb of the same or lower wattage, replace the shield.

Plug the refrigerator back in.

NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002.

LED Lighting – Module (on some models)LED Lighting – Individual (on some models)LED lighting will need to be replaced by an authorized technician.Call 1.800.432.2737 in the United States. InCanada, call 1.800.561.3344

Light Shield

Freezer Light (on some models)

Appearance may vary

CAUTION: Light bulbs may be hot.

Unplug the refrigerator.

Remove the freezer basket for access. The bulb is located at the rear of the freezer inside a light shield.

To remove, grasp the shield at the top and pull out to release the tabs at the bottom.

After replacing with an appliance bulb of the same or lower wattage, replace the shield and freezer basket.

Plug the refrigerator back in.

15