Installation Instructions

INSTALLING THE REFRIGERATOR (cont.)
6REMOVE THE FRESH FOOD DOOR HANDLE

(For placement in the installation location or reversal of the handles – on some models)

Stainless steel (on some models):AREMOVING
THE DOOR HANDLE:

 

Loosen the set screws

 

with the 3/32″ Allen

 

wrench

 

and remove

Badge

the handle. NOTE: For

A

Double Door models

 

follow the same

 

procedure on the

 

opposite door.

B

Mounting

Fasteners

(appearance may vary)

Plastic handle (on some models):

AREMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners.

REVERSING THE DOOR HANDLE (on some models):
• Remove

 

the handle

 

mounting

B

fasteners with
a 1/4″ Allen

 

wrench and

Badge

transfer the

 

handle

 

mounting

A

fasteners to the

 

right side.

 

• Remove the

Mounting

logo badge.

Fasteners

• Remove and

 

transfer the

 

(appearance may vary)

plug button to

 

 

the left side of the fresh food door. NOTE: Use a flat plastic edge to prevent damaging the door. Remove any adhesive on the door with a mild detergent.

Remove the paper covering on the adhesive backing on the logo badge prior to carefully attaching the badge to the door.

7REMOVE THE FREEZER DOOR HANDLEStainless steel and plastic handles:

ALoosen the set screws located on the underside of the handle with a 1/8″ or 3/32″ Allen wrench and remove the handle.

NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4″ Allen wrench.

A

A

A

(appearance may vary)

 

(appearance may vary)

 

 

 

23