GE 21 CAUTION:, INSTALLING THE REFRIGERATOR, (cont.), 11SET THE CONTROLS, 10LEVEL THE REFRIGERATOR, NOTE:, I (on), clockwise to raise, counterclockwise to lower

Installation Instructions

INSTALLING THE REFRIGERATOR10LEVEL THE REFRIGERATORThe leveling legs have 2 purposes:

1)Leveling legs adjust so the refrigerator is firmly positioned on the floor and does not wobble.

2)Leveling legs serve as a stabilizing brake to hold the refrigerator securely in position during operation and cleaning. The leveling legs also prevent the refrigerator from tipping.

ARemove the grille by removing the two Phillips- head screws.

BTurn the leveling legs clockwise to raise the refrigerator, counterclockwise to lower it.

CAUTION: To avoid possible personal injury or property damage, the leveling legs must be firmly touching the floor.

CReplace the base grille by inserting the two Phillips-head screws.

(cont.)

11SET THE CONTROLSSet the controls to the recommended setting.

12REMOVE PACKAGING START ICEMAKER (icemaker models)

A)Remove all tape, foam and protective packing from shelves and drawers.B)Remove the tie downs from the freezer baskets.

C)Place half width basket onto drawer slides. See About the freezer section for instructions.

Set the icemaker power switch to the I (on) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (–9°C) or below. It will then begin operation automatically. It will take 2–3 days to fill the ice bin.

Power switch

NOTE:

In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the icemaker.

25