About TurboCool.™ (on some models)

GEAppliances.com

(on some models)

(on some models)

How It Works

TurboCool rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After 8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to

the original setting.
How to Use

Press TurboCool. The refrigerator temperature display will show .

After TurboCool is complete, the refrigerator compartment will return to the original setting.

NOTES: The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fanswill continue to run if they have cycled on.
About Door Alarm (on some models)

The door alarm will sound if any door is open for more than 2 minutes. The beeping stops when you close the door.

(on some models)

(on some models)

 

 

 

 

 

 

About Energy Saver (on some models)

 

 

 

 

 

 

 

 

 

 

 

 

This product is equipped with an Energy

 

 

 

 

 

 

Saver feature. The refrigerator is shipped with

 

 

 

 

 

 

the Energy Saver feature enabled.

 

 

 

 

 

 

Over time, moisture can form on the front

 

 

 

 

 

 

surface of the refrigerator cabinet and cause

(on some models)

rust. If moisture does appear on the front

 

 

 

 

 

 

surface of the refrigerator cabinet, turn off

 

 

 

 

 

 

the Energy Saver feature by pressing and

 

 

 

 

 

 

releasing the ENERGY SAVER pad on the

 

 

 

 

 

 

 

 

 

 

 

 

control panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(on some models)

6