Display Icons | GE 263, 268 specs

Display Icons

Figure 9

9

10

		PM
		MIN
		LBS
		KG
		x100
7	6	8
	6

1

4

2

3

4

5

NOTE: In normal operation and during programming, only a few of the icons will actually be displayed.

1.Displays amount of conditioning capacity remaining.

2."PM" indicates that the time displayed is between 12:00 noon and 12:00 midnight (there is no AM indicator). PM indicator is not used if clock mode is set to 24-hour.

3.When "MIN" is displayed, the value entered is in minute increments.

4.When "LBS" is displayed, the value entered is in pounds.

5.When "Kg" is displayed, the value entered is in kilograms or kilograins.

6.Four digits used to display the time or program value. Also used for error codes.

7.Colon flashes as part of the time display. Indicates normal operation.

8.X100 multiplier for large values.

9.Shows when water is flowing through the valve.

10.Banner display.

Display Icons	23
	Rev A

Image 23

GE 263, 268 manual Display Icons

Contents

Operations Manual Table of Contents Icons That Appear In This Manual Introduction How To Use This Manual Mechanical General Warnings And Safety InformationElectrical General System Operation Cycle Functions Cycle Water Flows Equipment Installation Valve Layout Ultramax Controller Control Layout Outdoor Locations Location Selection Location Selection Rev a Water Line Connection Water Line Connection Rev a Drain Line Connection Drain Line Not used with 3-cycle filter system Regenerant Line Connection Overflow Line Connection Overflow Line Connection Rev a AC Adapter Input Application Part Number Electrical ConnectionVAC AC Adapters Controller Location Valve Camshaft 25% Sodium Hypochlorite Disinfection Of Water ConditionersValve Disc Operation Sodium or Calcium Hypochlorite Application Calcium Hypochlorite Controller Memory Power Loss Memory RetentionUltramax Controller Motor Display Icons Programming Conventions Keypad Buttons Things You Might Need to Know Level I Programming Setting Time of DayProgramming Overview Setting Regeneration Time Setting Day of Week Filter Operation Type Setting the Calendar OverrideLevel II Programming Conditioner Operation Type Setting the Hardness conditioner only Setting Backwash Days 263 filter onlySetting the Salt Amount 268 softener only Setting Capacity Softener Default Capacity Setting Viewing the Injector Type Setting Clock ModeSetting Units of Measure Adjusting the Cycle Times Conditioner Cycle Times Operation Type Setting the Service Interval Setting the Chlorine Generator/Salt Check conditioner only Total Water Used GAL X 100a Months Since SERVICEaLevel III Programming Peak Flow Rate GPMa Function Display Text Placing Conditioner Into OperationConditioner and Filter Start-Up SET Action Key Duration Display Rev a Performa Exploded View Part Code Description Qty Performa Parts List Problem Possible Cause Solution TroubleshootingUltramax Series Controller Troubleshooting System Troubleshooting Intermittent or Low water pressure Rev a Controller Reset UltraMax System Configurations