GE 268, 263 manual Setting Clock Mode, Setting Units of Measure, Viewing the Injector Type

The controller is capable of displaying 6 different languages. They are as follows:

1 = English

2 = Spanish

3 = French

4 = Italian

5 = Flemish

6 = German

Press the SET button and select the desired language using the UP or DOWN buttons. Press the SET button to accept the selection.

•Setting Clock Mode

The controller can be programmed to operate with a 12- or 24-hour clock. Program the clock mode to "12" for a 12-hour clock or "24" for a 24-hour clock. When the controller is programmed as a 12-hour clock the PM indicator will illuminate during the PM hours. There is no AM indicator.

•Setting Units of Measure

The controller can be programmed to operate in U.S. or Metric units. Program the Units of Measure to 0 (zero) for U.S. units or 1 for Metric units.

•Viewing the Injector Type

Is selected by system model number and cannot be changed.

•Adjusting the Cycle Times

Conditioner Cycle Times

The following cycle times are adjustable.

268 Conditioner
Cycle	Range
Backwash 1	1-60 minutes
Slow Rinse *	1-125 minutes
Fast Rinse 1	1-30 minutes
Backwash 2	0-30 minutes
Fast Rinse 2	0-30 minutes
263 Filter Cycle Times
Cycle	Range
Backwash	1-50 minutes
Fast Rinse	1-30 minutes

Refill time does not appear as this cycle time is determined by the salt setting.

*The controller calculates the Slow Rinse default time on injector type, system size and salt dosage. The cycle times can be adjusted for custom applications. Please contact your Ultramax Water Treatment Dealer before attempting to adjust the Slow Rinse time.

30	Level II Programming
Rev A