GE 26998 manual Answering System Setup, Setting the Voice TIME/DAY Stamp

ANSWERING SYSTEM SETUP

volume buttons

memo button	min button
display	hour button
volume

page button

		memo
		rev/skip
page	-	+
		messages

day/check button

	play/stop	answer on/off
		button
in use/charge	erase
	mic	announce button
indicator
review (-)/skip (+)		erase button
button	play/stop button	mic

This section shows you how to set up your answering system to receive incoming calls. Before you begin the setup, you must turn on the answering system.

•Press the answer on/off button on the side of the base to turn the answering system on and off.

NOTE: The answering system displays “- -” when it is off.

SETTING THE VOICE TIME/DAY STAMP

1.Make sure the answering system is ON.

2.Press and hold the day/check button to set the day of the week.

3.Press the hour button to set the hour (a.m. or p.m.).

4.Press the min button to set the minute. When you press and hold the min button, the time advances in 5-minute intervals.

5.Press and release the day/check button to review the day and time settings.

10