GE 26998 manual Answering System Operation, Inserting a Pause in the Dialing Sequence

1.Make sure the phone is ON.

2.Press memory and then press 7.

3.When you hear the access tone, press memory and then press 8.

4.At the next access tone, press memory and then 9.

TIP: Wait for the access tones before pressing the next memory button, or your call might not go through.

INSERTING A PAUSE IN THE DIALING SEQUENCE

Press the # pause button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as one digit in the dialing sequence. Pause shows in the display as a “P ”.

REVIEWING AND DELETING STORED NUMBERS

1.Press the memory button.

2.Use the CID/VOL left (-) and right (+) arrow buttons to scroll to the desired memory location or press 0-9.

3.While the entry is displayed, press the channel/delete button. The display shows DELETE ?

4.Press channel/delete again to erase the current record.You will hear a confirmation tone.

ANSWERING SYSTEM OPERATION

This section discusses the buttons and features on the answering system.

MESSAGES INDICATOR

The messages indicator shows you the number of new messages you have received. The answer on/off button must be turned on for the messages indicator to work.

19