GE 26998 manual Deleting the Current Record, Deleting ALL Records, Dialing a Caller ID Number

DELETING THE CURRENT RECORD

1.Press channel/delete button. The display shows DELETE?

2.Press delete/channel again to erase the current record. The display shows DELETED, and you will hear a confirmation tone.

DELETING ALL RECORDS

1.Press and hold channel/delete. The display shows DELETE ALL?

2.Press channel/delete again to erase all records.You will hear a confirmation tone.

DIALING A CALLER ID NUMBER

1.Make sure the phone is OFF.

2.Use the CID/VOL left (-) and right (+) arrow buttons to display the desired Caller ID record.

3.Press the TALK/CALLBACK button to dial the number.

CHANGING THE NUMBER FORMAT

The format/answerer button lets you change the format of the displayed number. The available formats are as follows.

7-digit7-digit telephone number.

10-digit3-digit area code + 7-digit telephone number.

11-digitlong distance code “1” + 3-digit area code + 7-digit telephone number.

1.Use the CID/VOL left (-) and right (+) arrow buttons to scroll to the number you want to call back.

2.If the number will not dial as shown, press the format/answerer button. Repeat if necessary, until the correct number of digits are shown.

3.Press TALK/CALLBACK.

NOTE: To clear the local area code, press and release flash/program, until ENTER AREA CODE is displayed. Then press channel/delete to delete the current local area code, or enter “000 ” to replace the current one.

16