Latch the door.

How to Delay the Start of Cleaning

(on some models)

1

2 Turn the Oven Temperature knob to CLEAN.

3 Press the START TIME ON/OFF pad.

4 Press the HOUR and MIN. pads to set the time cleaning will start.

When the CLEAN light flashes, and the oven has completely cooled, slide the latch handle to the

left as far as it will go and turn the Oven Temperature knob to OFF.

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

You cannot set the oven for cooking until the oven is cool enough for the door to be unlatched.

While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the COOK TIME ON/OFF pad.

If the shelves become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

27

Page 27
Image 27
GE 164D3333P159, 49-8927 How to Delay the Start of Cleaning, After a Clean Cycle, Press the Start Time ON/OFF pad