A number, Flash in the display, Power outage | GE 49-8927 manual

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Before you call for service…

Troubleshooting Tips

Problem	Possible Causes	What To Do

“F—and a number”	You have a function	• Disconnect all power to
flash in the display	error code.	the range for 5 minutes
		and then reconnect power.
		If the function error code
		repeats, call for service.
		• On self-cleaning models,
		if a function error code
		appears during the self-
		cleaning cycle, check the
		oven door latch. The latch
		may have been moved,
		even if only slightly, from
		the locked position.
		Make sure the latch is
		moved to the right as far
		as it will go. Turn the Oven
		Temperature knob to
		OFF. Allow the oven to
		cool for one hour. Put the
		oven back into operation.

Power outage	Power outage or surge.	• Some models will
		automatically resume their
		setting once the power is
		restored. On models with a
		clock, you must reset the
		clock. If the oven was in
		use, you must reset it by
		turning the Oven
		Temperature knob back to

OFF, setting the clock and resetting any cooking function.

50

Image 50

GE 49-8927, 164D3333P159 owner manual A number, Flash in the display, Power outage

Contents

Range GE Answer Center Write the model and serial numbers here Staple sales slip or cancelled check hereCongratulations You Are Now Part of Our Family Troubleshooting Tips Safety InformationInstallation Instructions Customer Service Important Safety Notice All ranges can tip and injury could result Safety Precautions Safety Information Instructions Troubleshooting Tips Customer Service Cook Meat and Poultry THOROUGHLY… Oven SELF-CLEANING Oven on some models Surface UNITS-ALL Models Radiant Surface Units on some models Customer Service Troubleshooting Coil Surface Units on some models Using the surface units How to Set Using the radiant surface units on some models About the radiant surface units… Copper Bottom Stainless SteelAluminum Porcelain Enamel Covered Cast Iron Surface Cookware Tips Wok Cooking Using the oven controls Clock and Timer Features Both the MIN. +/- pads for about 4 seconds Using the oven controls. on some modelsAllow the oven to be left on for more than 12 hours Troubleshooting Tips Customer Service Using the ovenOven Temperature Knob on some models How to Set the Oven for Baking or Roasting Aluminum Foil Preheating and Pan PlacementHow to Set the Oven for Broiling Broiling guide Comments Using the clock and timer. on some models How to Set a Delay Start and Automatic Stop Using the timed baking Roasting features. on some modelsHow to Set an Immediate Start Automatic Stop Press Cook Time ON/OFF Adjust the oven thermostat-Easy to do yourself For Self-Cleaning Models with Only an Oven Temperature Knob To Adjust the Thermostat on Standard Clean Models Type of margarine will affect baking performance How to Set the Oven for Cleaning Using the self-cleaning oven on some modelsBefore a Clean Cycle Press the Start Time ON/OFF pad How to Delay the Start of CleaningAfter a Clean Cycle Care and cleaning of the range Oven Interior non-self clean models Lift-Off Oven Door To clean the inside of the doorTo clean the outside of the door Oven Shelves Oven Light Replacement on some modelsOven Heating Elements To remove the cover To remove the storage drawer How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan & Grid To replace the storage drawer For heavy, burned-on soil Cleaning the glass cooktopDaily Cleaning National Parts Center Special Care Porcelain Enamel Cooktop on some models Lift-Up Cooktop on some models To remove a surface unit To replace a surface unit Painted Surfaces Control Panel and KnobsOven Vent Installation of the range Before You Begin Prepare the Opening Flooring Under the Range Prepare for Electrical Connection Power Cord Strain Relief Installation Wire Power Cord Installation Before After Wire Conduit Installation Screw Final Check Anti-Tip Bracket InstallationLeveling the Range Before you call for service… Properly Coil Cooktops Surface unitsNot functioning Oven-All Models Food does not Food does not bakeOr roast properly Broil properly At Broil Blank or indicator Oven temperatureClock and timer When range is Flash in the display Power outageA number Self-clean cycle Self-Cleaning Models Oven will notSelf-clean When you wanted Oven not clean Clean lightIs on when you After a clean cycle Safety Information Customer Service One Year Electric Range WarrantyFor The Period We Will Replace Two Years TDD 800-TDD-GEAC Service Telephone NumbersIn-Home Repair Service 800-GE-CARES