Note
If Quick Arm feature is on, an access code is not required to arm the system to Level 2— STAY.
Note
If Quick Arm feature is on, an access code is not required to arm the system to Level 3— AWAY.
Note
Contact your installer if you want to use this feature.
Important !
If you step outside and are planning to come back in, do not close the door behind you!
Use this level to arm perimeter doors and windows only. Interior devices such as motion sensors remain off so you can stay inside the premises without setting off an alarm. If you wish, you can exit through a designated delay door after arming to Level
To arm to Level
1.Close all protected perimeter doors and windows.
2.Press 2 at any touchpad. Touchpads display, “ENTER CODE.”
3.Enter your Access Code. Touchpads display, “Armed to STAY” and the system sounds two short beeps.
4.If leaving the premises, exit through a designated delay door immediately.
To arm to Level
Press the 
Lock button once to go from Level 1 to Level 2.
Use this level to arm perimeter door/window sensors and interior motion sensors for maximum protection.
To arm to Level
1.Close all perimeter doors and windows.
2.Press 3 at any touchpad. Touchpads display, “ENTER CODE.”
3.Enter your Access Code. Touchpads display, “ARMED TO AWAY” and the system sounds three short beeps.
4.Exit through a designated delay door immediately.
To arm to Level
•Press the 
Lock button twice to go from Level 1 to Level 3, or once to go from Level 2 to Level 3.
This feature lets you arm your system without using an access code. Disarming the system still requires entering an access code.
Quick Arm to Level 2:
From Level
Quick Arm to Level 3:
From Level 1 or
Your system may be set up to let you exit and
To use Quick Exit:
1.When the system is armed to
2.Open a designated delay door and go outside. Leave the door open if you are planning to come back in!
3.Return within two minutes and close the door. The system will rearm to
Concord 4 Series Security Systems | 7 |