Note

Step 10 can only be performed on Concord 4 systems using the System Master Code.

Note

The system will not accept the same code for two different users.

3.Press B until the touchpad displays the type of code you wish to change (Regular User codes, Partition Master Codes, or System Master code), then press #. For example, if you want to change a Regular User code, press # when the touchpad displays “REGULAR USER CODES” or “REG CODES.”

4.Press B until the touchpad displays the user code you wish to change, then press #. For exam- ple, if you want to change Regular User code 2, press # when the touchpad displays “USER 02” or “REG CODE 02.”

5.Enter the new code and press #.

6.Press B. “DIRECT BYPASSING” or “BYPASS” appears: Press 1 + # to turn the option off for this user code.

Press 2 + # to turn the option on for this user code.

7.Press B. “REMOTE ACCESS” or “REMOTE” appears: Press 1 + # to turn the option off for this user code. Press 2 + # to turn the option on for this user code.

8.Press B. “SYSTEM TESTS” or “TESTS” appears: Press 1 + # to turn the option off for this user code. Press 2 + # to turn the option on for this user code.

9.Press B. “LATCHKEY REPORT” or “LATCH” appears: Press 1 + # to turn the option off for this user code. Press 2 + # to turn the option on for this user code.

10.Press B. “PARTITION ASSIGN” or “P” appears:

Enter the desired partition numbers (1-6) for this user code.

11.Press * + B to move to the next user code, or * + 00 + # to exit the programming menus.

To erase a user code:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press B until the touchpad displays “USER CODES,” then press #.

3.The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press #. (You can- not delete the System Master code.)

4.Press B until the touchpad displays the user code you wish to erase, then press #. For exam- ple, if you want to change User code 4, press # when the touchpad displays “USER 04” or “REG CODE 04.”

5.Enter the System or Partition Master code you used in Step 1 and press #. The deleted code appears as “USER 04 ****” or “RG 01 ––––,” for example.

6.Press * + B to move to the next user code, or * + 00 + # to exit the programming menus.

To change or delete the Partition Master Code:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press B until the touchpad displays “USER CODES,” then press #.

3.The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press B until the display reads “PARTITION MASTER CODE” or “PTN MASTER,” then press #.

4.Enter the System Master Code to delete the existing Partition Master Code

OR enter a new 4 digit Partition Master Code to replace the existing code, then press #.

5.Press * + 00 + # to exit the programming menus.

To change the System Master Code:

1.Enter the programming menus by pressing 9 + System Master CODE.

2.Press B until the touchpad displays “USER CODES,” then press #.

56

Concord 4 Series Security Systems