4. Press * + 00 + # to exit the programming menus.

24-HourFormat

 

 

 

 

 

00:00

Midnight

08:00 8:00am

16:00 4:00pm

01:00

1:00am

09:00 9:00am

17:00 5:00pm

02:00

2:00am

10:0010:00am

18:00 6:00pm

03:00

3:00am

11:0011:00am

19:00 7:00pm

04:00

4:00am

12:00 Noon

20:00 8:00pm

05:00

5:00am

13:00 1:00pm

21:00 9:00pm

06:00

6:00am

14:00 2:00pm

22:0010:00pm

07:00

7:00am

15:00 3:00pm

23:5911:59pm

 

 

 

Figure 4. 24-Hour Format

To set the System Date:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 021.

3.Enter the current date as 6 digits (mm/dd/yy) then press #. For example, if the current date is January 15, 2000, press 011500 + #.

4.Press * + 00 + # to exit the programming menus.

AdjustingSystem Soundsand TouchpadBrightness

Adjusting the Touchpad Beeps (Fixed Display Touchpad Only)

The frequency or pitch of chime and trouble beeps from each fixed display touchpad can be adjusted individually to a more desirable or distinct tone.

Chime and trouble beep tones sound using the default frequency during, or within 15 seconds of any button activity at that specific touchpad.

To change status tone pitch:

1.Press and hold * + 0 until you hear a steady tone, then release the buttons.

2.Press and hold 1 to lower the pitch or press and hold 2 to raise the pitch.

3.Release the button when the desired pitch is heard.

After about 15 seconds of no touchpad activity, the steady tone stops sounding.

Adjusting the System Status Voice Volume

If your system includes an optional voice module, you may want to adjust the volume at which system status messages are announced.

To change the voice volume:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 044.

3.Select a volume level 1 – 7 (7 being the loudest) and press #.

4.Press * + 00 + # to exit the programming menus.

Adjusting the Touchpad Display Brightness

You may want to change the brightness of a touchpad display based on its location in a building or room. For example, dim the touchpad display in a bedroom or enhance a display near a win- dow.

Changing the touchpad display affects only the touchpad currently being used.

To change touchpad display brightness:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 043.

16

Concord 4 Series Security Systems