3.The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press B until the display reads “SYSTEM MASTER CODE” or “SYS MASTER,” then press #.
4.Replace the existing code with the new 4 digit System Master Code then press #.
5.Press * + 00 + # to exit the programming menus.
Using Programming Shortcuts
A programming shortcut is a number that “jumps” you to a particular spot in the programming menus.
A series of shortcut numbers takes you directly to the feature or code you want to change.
1.Enter User Programming.
Local Phone | # + 9 + CODE |
|
|
Remote Phone Access | Dial the phone number + # + CODE + # + 9 + CODE |
|
|
Touchpad | 9 + CODE |
|
|
2.Enter a programming command sequence.
Time |
| * + 020 + TTTT + # |
|
Date |
| * + 021 + DDMMYY + # |
|
|
|
|
|
Regular User Codes | Concord 4 |
| Concord Express V4 |
| User 00: * + 0300000 + NNNN + # [* + 030000 + NNNN + #] | ||
| User 01: * + 0300010 + NNNN + # [* + 030001 + NNNN + #] | ||
| User 02: | * + 0300020 + NNNN + # [* + 030002 + NNNN + #] | |
| (continues up to User 229) | (continues up to User 15) | |
| User 229: * + 0302290 + NNNN + # |
| |
| If using alphanumeric or fixed display touchpads, use A and B to scroll | ||
| through the code attributes and change them as required. | ||
Partition Master Codes | Partition 1:* + 0310 + NNNN + # |
| |
(Concord 4 systems only) | Partition 2:* + 0311 + NNNN + # |
| |
| Partition 3:* + 0312 + NNNN + # |
| |
| Partition 4:* + 0313 + NNNN + # |
| |
| Partition 5:* + 0314 + NNNN + # |
| |
| Partition 6:* + 0315 + NNNN + # |
| |
|
|
|
|
System Master Code |
| * + 0320 + NNNN + # |
|
Direct Bypassing Attribute |
| * + 030NNN1 + 1(off) or 2(on) + # (nnn = user no.) | |
|
| * + 030NN1 + 1(off) or 2(on) + # (Concord Express V4) | |
|
|
| |
Remote Access Attribute |
| * + 030NNN2 + 1(off) or 2(on) + # (nnn = user no.) | |
|
| * + 030NN2 + 1(off) or 2(on) + # (Concord Express V4) | |
System Test Attribute |
| * + 030NNN3 + 1(off) or 2(on) + # (nnn = user no.) | |
|
| * + 030NN3 + 1(off) or 2(on) + # (Concord Express V4) | |
|
|
| |
Latchkey Report Attribute |
| * + 030NNN4 + 1(off) or 2(on) + # (nnn = user no.) | |
|
| * + 030NN4 + 1(off) or 2(on) + # (Concord Express V4) | |
Partition Assign Attribute |
| * + 030NNN5 + desired partitions | |
(Concord 4 systems only) |
|
|
|
|
|
| |
Downloading |
| * + 041 + 1(off) or 2(on) + # | |
Touchpad Brightness |
| * + 043 + 0 through 3 + # |
|
|
|
|
|
Volume |
| * + 044 + 0 through 7 + # |
|
Voice Chime |
| * + 045 + 1(off) or 2(on) + # | |
|
|
|
|
Concord 4 Series Security Systems | 57 |