Accidental Smoke and Fire Alarms

To silence the alarms and reset the sensor:

1.Press CODE or 1 + CODE, once to silence the alarm.

2.Press 1 + CODE, again to reset the smoke alarm.

Smoke and fire panic alarms cannot be cancelled and are always reported to the central station.

If, after disarming the system once, the system still thinks a sensor is open, disarm the system again.

In the event of an accidental smoke or fire alarm, follow these dealer instructions:

_________________________________________________________________________

_________________________________________________________________________

_________________________________________________________________________

_________________________________________________________________________

Dialer Abort

I have ____ seconds to cancel an accidental intrusion or auxiliary alarm before it is reported to the central station.

Doors and Delay Time Settings

When the system is armed, enter and exit the premises only through designated delay doors. Entry Delay Time: The time allowed to enter the premises and disarm the system.

Exit Delay Time: The time allowed to leave the premises after arming the system.

 

Door Location

Ptn.

Entry Delay

Exit Delay

 

 

 

 

 

1

 

1

:

:

 

 

 

 

 

2

 

2

:

:

 

 

 

 

 

3

 

3

:

:

 

 

 

 

 

4

 

4

:

:

 

 

 

 

 

5

 

5

:

:

 

 

 

 

 

6

 

6

:

:

 

 

 

 

 

System Features

Feature

My system features include:

 

 

Quick Arm

Yes. Press the arming level desired.

 

No. Enter arming level, then access code.

 

 

Quick Exit

Yes. Press D and exit your armed premises through a delay door within 2

 

minutes.

 

No. I need to disarm my system in order to exit the premises.

 

 

Exit

Yes. If I re-enter the armed premises during the Exit Delay time, the panel

Extension

will restart the Exit Delay time.

 

No. If I re-enter the armed premises during the Exit Delay time, it will con-

 

tinue to count down and I must disarm the system.

 

 

Keyswitch

Yes. I can use a key to arm the system. The switch is located:

Arming

______________________________________________________________

 

 

No.

 

 

46

Concord 4 Series Security Systems