IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

WARNING - When using this appliance, always exercise basic safety precautions, including the following.

Use this appliance only for its intended purpose, as you will find described in this Use and Care Guide.

This dishwasher must be properly

installed and located in accordance with the Installation Instructions before it is

used.

-This appliance must be connected to a grounded metal, permanent wiring system; or an equipment- grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead of the appliance. See Installation Instructions for grounding details.

-Connect to a properly rated, protected and sized power-supply circuit to avoid electrical overload.

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in

the vicinity of this or any other appliance .

Use only powder or liquid detergents or wetting agents recommended for use in a dishwasher

¥Do not wash plastic items unless marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

¥Load light plastic items so they will not become dislodged and drop to the bottom of the dishwasher - they might come into contact with the Calrod¨ heating element and be damaged.

To minimize the possibility of injury.

¥When loading items to be washed:

A.Locate sharp items so that they are not likely to damage the door seal, and

¥B. Load sharp knives with handles up to reduce the risk of cut-type injuries.

¥Do not tamper with controls.

¥Do not touch the Calrod¨ heating element during or immediately after use.

¥Do not operate your dishwasher unless all enclosure panels are properly in place.

¥Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.,

¥Close supervision is necessary if this appliance is used by or near children. Do not allow children to play inside, on or with this appliance or any discarded appliance. Dispose of discarded appliances and shipping or packing material properly. Before discarding a dishwasher, remove the door of the washing compartment.

¥ Keep all washing detergents and wetting agents out of the reach of children, preferably

in a locked

cabinet. Observe all warnings on container labels to avoid personal injury.

¥To minimize the possibility of electric shock, disconnect this appliance from the power supply

before attempting any maintenance. NOTE: Turning the control dial to the OFF position does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

WARNING-HYDROGEN GAS is produced by the chemical action within your water heater. It can accumulate in the water heater and/or

water pipes if hot water has not been used for a period of two weeks or longer. HYDROGEN GAS IS EXPLOSIVE. To prevent the possibility of damage or injury, if you have not used hot water for two weeks or more, or moved into a residence in which the hot water system may not have been used for some time, turn on all hot water faucets and allow them to run for several minutes before using any electrical appliance which is connected to the hot water system. This will allow any hydrogen gas to escape. Also, since the gas is flammable, do not smoke or use an open flame or appliance during this process.

SAVE THESE

INSTRUCTIONS

Important Safety Instructions

3

Page 3
Image 3
GE 500A200P047 installation instructions Important Safety Instructions, Read all instructions before using this appliance

500A200P047 specifications

The GE 500A200P047 is a notable component within General Electric's extensive portfolio of innovative technologies. Widely recognized for its robust design and high performance, this device plays a pivotal role in various applications, particularly in industrial automation and power systems.

One of the standout features of the GE 500A200P047 is its exceptional reliability. Engineered for demanding environments, it is built to withstand extreme temperatures, vibrations, and other challenging conditions that are common in industrial settings. This reliability ensures that the component maintains optimal performance over time, reducing downtime and maintenance costs for operators.

The GE 500A200P047 also incorporates state-of-the-art technology aimed at enhancing efficiency and functionality. It features advanced digital controls, which allow for precise monitoring and management of electrical systems. This technological integration not only optimizes power distribution but also contributes to energy savings, making it an eco-friendly choice for enterprises looking to reduce their carbon footprint.

Furthermore, this component is designed with versatility in mind. It supports a range of applications, from low-voltage distributions to high-power industrial machinery. This adaptability makes the GE 500A200P047 a preferred choice among engineers and designers who require flexibility in their designs while ensuring top-tier performance.

Another notable characteristic of the GE 500A200P047 is its user-friendly interface. The design includes intuitive controls and diagnostic tools, facilitating easier operation and troubleshooting. This user-centric approach simplifies the complexity often associated with industrial systems, enabling quicker resolution of issues and enhancing overall productivity.

In terms of safety, the GE 500A200P047 is equipped with multiple safety features designed to protect both the system and its operators. These safety technologies prevent overload, short circuits, and other hazardous conditions, ensuring that operations run smoothly and securely.

In conclusion, the GE 500A200P047 stands out as a powerhouse in the industrial technology sector. With its impressive reliability, advanced digital controls, versatility, user-friendly interface, and robust safety features, it serves as a crucial component in modern industrial networks. Organizations looking to enhance efficiency and reliability in their operations will find the GE 500A200P047 to be an invaluable addition to their technological arsenal.