GE 500A200P047 installation instructions Instructions, HOW to GET Started 3 Easy Steps

HOW TO OPERATE YOUR DISHWASHER

Load your dishwasher according to the instructions in the USE AND CARE GUIDE.

HOW TO GET STARTED (3 EASY STEPS)

SELECT A CYCLE	1	CLOSE DISHWASHER	2	3 TURN TO START
AND OPTIONS		AND LATCH

PS...Have you added soap and rinse agent?

How to select a cycle

NOTE: Your dishwasher will have some or all of these cycles or options. Read the list to become familiar with the choice your dishwasher has. To make sure you have clean dishes, you should always choose a higher performance cycle if you are not certain.

CYCLES ON PUSHBUTTONS

Cycles

POTSCRUBBER or

POTS AND PANS HOTSTART NORMAL

LIGHT or WATER SAVER

RINSE

Cycle Description

For heavily soiled dishes or cookware with dried-on soils. Everyday dishes may be included. This cycle will not remove burned-on foods.

Preheats wash water to the correct temperature.

For loads of everyday dishes, glasses and cookware with medium soils. Designed to yield high performance on average soils.

For dishes with light soils

For rinsing partial loads that will be washed later. Make sure ENERGY SAVER option is selected. Do not use detergent.

Operating

Cycles

HOTSTART

SHORT WASH or

WATER SAVER

RINSE AND HOLD

PLATE WARMER

CYCLES ON DIALS

Cycle Description

Preheats wash water to the correct temperature.

1)-Select a cycle and any optionbs. 2)-Be sure the door is unlatched.

3)-Slowly turn the dial to HOTSTART. 4) - Latch the door to START the cycle.

For quickly washing loads of everyday dishes with medium soils that have not dried-on, such as loads consisting mostly of glasses.

1)-Select the NORMAL cycle and any options. 2)-Be sure the door is unlathched. 3)-Slowly turn the dial to SHORT. 4)-Latch the door to START the cycle.

For rinsing partion loads that will be washed later. Make sure ENERGY SAVER is selected. Do not use detergent.

1)-Make sure ENERGY SAVER is selected. 2)-Be sure the door is unlatched. 3)-Slowly turn the dial to RINSE AND HOLD. 4)-Latch the door to START the cycle.

For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.

1)-Load clean dishware to be warmed. 2)-Select HEAT DRY or DRYING.

3)-Be sure the door is unlatched. 4)-Slowly turn the dial to PLATE WARMER. 5)-Latch the door and START the cycle.

Instructions

Energy Options

HEAT WASH

HEAT DRY or DRYING ON

ENERGY SAVER AIR DRY or DRYING OFF

ENERGY OPTIONS

Energy Options Description

Provides extra heat for best performance. It is used best with heavily-soiled dishes.

Turn the drying heater on for fast drying. This option will extend the time to your wash cycle by approximately 32 minutes.

Turns all of the other OPTIONS off.

Turns off the drying heat option. Dishes air dry naturally and energy is saved.

	ENERGY OPTIONS
DELAY START	DELAY START allows you to delay the start time of any PUSH BUTTON CYCLE
	automatically. 1)-Select your desired wash cycle and options. 2)-Turn the dial to the
	desired time. 3)-The door must be latched for the dishwasher to operate.	7