GE 4100, 6100 manual Zoneline Series, Type, Function, Thermostat Model, Low-VoltageConductors

geappliances.com

Remote Thermostat Control Selection Chart For Zoneline Packaged Terminal Units

Zoneline Series	Thermostat Model	Type	Function	Low-Voltage Conductors
4100	RAK164D1	Digital	Cooling and Heating	5
	RAK164P1	Digital Programmable		5
6100	RAK148D1	Digital	Single-Stage Cooling –	6
	RAK148P1	Digital Programmable	2-Stage Heating	6

Thermostat wire size – up to 60 feet AWG20 – up to 66 feet AWG18

For remote thermostat operation follow the steps below:

1.Turn on the unit and ensure it is working properly BEFORE proceeding.

2.Unplug the unit or disconnect power and remove the room cover.

3.Connect the thermostat wiring per the appropriate diagram/colors for your model.

4.Plug the unit back in or reconnect power.

5.Press the Aux Set button once. The letters AU will appear in the display.

6.Press the mode button until the number “6” appears in the left hand digit.

7.Press the up arrow once so the top half of the right hand digit is lit.

8.Press the Aux Set button to exit the setup function.

9.Replace the room cover.

See pages 12 and 13 for full instructions on using the

Auxiliary Controls Feature.

17