GE 6100, 4100 manual Zoneline Features, Resistance heat

Zoneline® Features

	Resistance heat		Heat pump
	AZ	AZ	AZ
	41 Series	41 Dry Air 25	61 Series
Cooling EER Range (230 Volts/265 Volts)	10.6 - 12.8	11.3 - 12.2	11.2 - 13.2
Heating COP Range (230 Volts/265 Volts)	N/A	N/A	3.3 - 4.0
Refrigerant type	R-410A	R-410A	R-410A
Cross-flow (tangential) blower	Standard	Standard	Standard
Enhanced Dehumidification	Optional	Standard	—
Heat pump with resistance heat back-up	—	—	Standard
Heat pump with supplemental resistance heat	—	—	Standard
Staged Heating	—	—	3-Stage***
Universal heaters - UPC**	Standard	Standard	Standard
Tactile touch pad controls with LED	Standard	Standard	Standard
Touch control set-up features	Standard	Standard	Standard
Highly featured microcomputer controls	Standard	Standard	Standard
Electric resistance heat lock-out (above 46°F)	—	—	Standard
Automatic emergency heat	Standard	Standard	Standard
Heat pump defrost system	—	—	Reverse cycle
High-Temperature Operation Protection	—	—	Standard
Quick heat recovery	—	—	Standard
Temperature Boost	—	—	Selectable
Separate Indoor & Outdoor	AC	AC	DC
Motors — Permanently Lubricated
2-Speed Outdoor Fan	Standard	Standard	Standard
Indoor fan speed settings	Hi/Low	Hi/Low	Hi/Low
Fan Only setting—2-speed	Hi/Low	Hi/Low	Hi/Low
Cool & heat only settings	Hi/Low/Auto	Hi/Low/Auto	Hi/Low/Auto
“SmartFan” Fan Cycle Control	Standard	Standard	Standard
Auto power recovery	Standard	Standard	Standard
Automatic Compressor Restart Delay	Standard	Standard	Standard
Freeze Sentinel™ (41F)	Standard	Standard	Standard
Heat Sentinel (85F)	Standard	Standard	Standard
Automatic indoor frost control	Standard	Standard	Standard
Temperature limiting	Electronic 7-step	Electronic 7-step	Electronic 7-step
Solid-state thermostat	Standard	Standard	Standard
Remote thermostat compatibility	Standard	Standard	Standard
Central desk control compatibility	Standard	Standard	Standard
2-position discharge grille 50º/40º	Standard	Standard	Standard
Upfront filter (interchangeable)	Standard	Standard	Standard
3-position manual air vent control	Standard	Standard	Standard
Sleep function	Standard	Standard	Standard
Transfer Fan Connections	Standard	Standard	Standard
Ducted Installation Capability	Optional	Optional	Optional
Corrosion-treated chassis	Optional	Standard	Optional
Internal condensate removal (ICR)*	—	—	Optional
*Not for use in corrosive environments

**UPC — Universal Power Cord Connection (see pages 42 and 54).

*** Two stage heating if using remote thermostat

265-volt units must be connected in a manner to meet National Electrical Code and all local codes.

8