Introduction

This manual is designed to provide product, performance and application information to our customers and their architects and engineers for use in selection and design of a zonal comfort control system utilizing GE Zoneline® Packaged Terminal Air Conditioners (PTAC) and Packaged Terminal Heat Pumps (PTHP). GE Zoneline PTACs and PTHPs are self-contained units designed for through-the-wall installations in hotels, motels, apartments, hospitals, nursing homes, add-on rooms and many other installations.

Zoneline units provide individual room or zone control in both cooling and heating operation. There is a model for practically every application, ranging in cooling capacity from 7,200 to 14,800 BTUH and heating capacity from 6,400 to 14,000 BTUH in heat pump operation. See pages 42 and 54 for resistance heaters available.

Zoneline offers a two-tier lineup: The Deluxe Line consists of the 4100 Series with electric resistance heat, the 4100 Series Dry Air 25 Models with enhanced dehumidification for hot and humid climates and the 6100 Series heat pump. The

6100 Series heat pump features reverse cycle defrost and simultaneous supplemental resistance heat, when needed, to maintain room comfort. Both offer tactile touch controls with digital display and optional corrosion protection.

Deluxe Line Standard Features:

Two-fan-motor system with Indoor Cross-Flow

Blower for quieter operation

Digital Controls

—­ LED Temperature Display

—­ Easy Temperature Selection

—­ Tactile Touch Pad

Universal Heaters

Heat Sentinel

“L” Coil Design Condenser

3-Position Vent Door

Freeze Sentinel

Indoor Coil Frost Control

Central Desk Control Interface

Remote Thermostat Control Interface

Random Restart

Electronic Temperature Limiting

“Smart Fan” Fan Cycle/Continuous Control

Transfer Fan Interface

Reverse Cycle Defrost and Simultaneous

Supplemental Resistance Heat on Heat Pumps

Quick Heat Recovery

Deluxe Line Optional Features:

Corrosion Protection

Internal Condensate Removal (on 6100 Series

Heat Pump without Corrosion Protection)

NOTE: Dry Air 25 models include all the standard features of the 4100 Series plus standard corrosion protection.

Advantages of the GE Zoneline System:

Flexible Application

—­ May be installed from flush to finished floor to 3" from the ceiling

—­ 7,200 to 14,800 BTUH units in same physical size

—­ Deluxe 4100 and 6100 Series may be ducted to condition more than one room

—­ Compatible with Class 2 remote thermostat control

—­ Compatible with 2-wire CDC or many Energy Management Systems

Economical Installation

—­ No ductwork necessary

—­ No mechanical equipment rooms or pipes required for heating/cooling units

—­ Replacement units fit existing 42"-wide by 16"-high wall cases

Quiet Operation

—­ Indoor cross-flow blower

Energy-Saving Operation

—­ Units in unoccupied areas may be turned off

—­ Designed for efficient cooling operation — EERs from 10.6 to 13.2

—­ Efficient heat pump units —­ COPs from 3.3 to 4.0

­—Extended heat pump operation without sacrificing room comfort

Ease of Maintenance

—­ Permanently lubricated fan motors

—­ Upfront lift-out interchangeable filters

—­ Slide-out chassis for easy access for cleaning or if service is required

Reverse Cycle Heat Pump Operation

The 6100 Series heat pumps utilize the unique GE PTAC heat pump operation to ensure a comfortable room. The logic used by the units is the same logic used by central system heat pumps to provide greater savings.

6

Page 6
Image 6
GE 6100 Introduction, Deluxe Line Standard Features, Deluxe Line Optional Features, Advantages of the GE Zoneline System