Continuous Processing
IMPORTANT: When using the continuous feed chute
the food gate must be removed and the continuous feed disc must be in place.
1.Make sure the Control Switch is turned to OFF and the unit is unplugged.
2.Lock the bowl onto base. (See “How to Lock the Bowl” on page 5.)
3.Place the continuous feed disc, ribbed side up, onto the motor shaft. Turn the disc slowly until it drops into position (level with top of bowl).
Continuous
Feed Disc
Motor Shaft
4.Select desired side of reversible slicing/shredding disc and place that side up on the motor shaft.
5.REMOVE FOOD GATE FROM CONTINUOUS FEED COVER TO PREVENT DAMAGE TO UNIT.
6.Lock on cover. (See “How to Lock the Cover” on page 5.) Place bowl under feed chute.
7.Plug in unit and select speed. Process food. Check the continuous feed chute frequently to make sure the opening is not blocked. If blocked, turn unit off and unplug. Clear blockage, then reassemble and continue processing.
NOTE: When using the continuous feed chute, some food may fall into the food processor bowl.
Hint!
Do not use the continuous feed chute feature when shredding root vegetables such as carrots and potatoes. As with most continuous feed processors, the shredded moist vegetables may clog in the chute. It is best to shred these vegetables into the food processor bowl. Slicing these root vegetables while using the continuous feed chute will not present a problem.
Slicer/Shredder 
Disc
Motor Shaft
8
