Installation Instructions
3PREPARE THE AIR CONDITIONER
(continues)
ERemove the shipping screws located on the top of the case.
FRemove the ground screws from each side of the case. Keep it in a safe location.
NOTE: Be sure to save this screw. You will need them later in the installation.
FRONT
GSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. Do not pull or lift on the styrofoam discharge area.
Do not pull or lift in this area—
damage to the unit may result
FRONT
HYour unit may come with internal packaging. This packaging must be removed prior to installing the air conditioner back into the cabinet.
4PREPARE THE CASE
AAttach the top rail gasket to the bottom of the top rail.
BInstall the top mounting rail with 4 type A screws from the inside of the case. Press firmly to drive the screws into the gasket and through the top mounting rail.
Top mounting rail
CSlide each side retainer onto the edge of each according panel. The figure shows the orientation of each accordion panel and side retainer assembly relative to the case from a top view of the unit.
SIDE RETAINER
WINDOW FILLER PANEL
SIDE RETAINER
WINDOW FILLER PANEL
DSlide the left and right accordion panels into the top and bottom mounting rails.
Top left
Top right
Bottom mounting rail
10
