Installation Instructions
5 PREPARE THE WINDOW AND INSTALL
THE CASE (continues)
H | CAUTION: |
|
| To prevent broken | Vinyl |
| glass or damage to |
|
| windows, on vinyl or |
|
| other similarly |
|
| constructed windows, |
|
| attach the window |
|
| locking bracket to the window side jamb. | |
| Attach the window locking | Wood |
| bracket with one Type C | |
|
| |
| screw.. |
|
ICut the foam top window gasket to the
window width.
J Stuff the foam between the
glass and the window to
prevent air and 
insects from getting into the room. NOTE: If the gasket supplied does not fit your window, obtain appropriate material locally to provide a proper installation seal.
6INSTALL THE AIR CONDITIONER
IN THE CASE
ASlide the air conditioner into the case by the base pan. Do not push on the controls, styrofoam air discharge housing or the finned coils. Make sure the air conditioner is firmly seated.
Do not press on these areas— damage to the unit may result
Base Pan
6INSTALL THE AIR CONDITIONER
IN THE CASE (continues)
BReplace the 2 screws removed earlier, one on each side of the case.
IMPORTANT: THE GROUND SCREWS MUST BE REINSTALLED TO ENSURE PROPER GOUND.
CReinstall the control to the panel housing by replacing the 2 screws you removed earlier.
Install Screws
DAttach the front grille to the case by inserting the tabs on the grille into the slots on the front top of the case. Push the grille in.
EReplace the screws.
FInstall the filter and the front grille.
GPlug in the air conditioner.
12
