GE AEQ2 About the controls on the air conditioner, Air Conditioner Controls, Remote Control

About the controls on the air conditioner

Features and appearance will vary.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

NOTE: The display always shows the room
	Light indicates the unit
temperature except when setting the Set	is in the temperature or
temperature or the Delay timer.	delay time Set mode.

Light indicates the delay timer is set.

Delay 1–24hr

Delay timer

Decrease

Mode select

Fan speed	Fan
Decrease

Temperature

set Increase

and Decrease

Delay timer Increase

Auto Fan on

Fan	Fan speed
	Increase

Unit power on/off

Air Conditioner Controls Remote Control

Controls

Power Pad

Turns air conditioner on and off.. When turned on, the display will show the room temperature..

Mode Pad

Use to set the air conditioner to Cool, Energy Saver or Fan Only mode..

Display

Shows the room temperature or time remaining on the Delay timer.. Shows the Set temperature while setting the temperature in Cool or Energy Saver modes.. The Set light will turn on while setting..

Temp Increase ▲ /Decrease ▼ Pads

Use to set temperature when in Cool or Energy Saver mode.. The Set light will turn on while setting..

Delay Timer Increase▲ (+) /Decrease ▼(–)

Pads

Each touch of the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease

–pads on the remote control will set the delay time when using the Delay 1–24hrtimer.. The Set light will turn on while setting..

Fan Speed Pads

Use to set the fan speed to Low, Med, High or Auto on the unit.. NOTE: On the remote control, use the fan speed Increase + / Decrease – pads to set the fan speeds to Low, Med or High.. Use the Auto pad to turn Auto fan on..

Delay Pads/Delay 1-24hr Pad

Delay ON—When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode and fan settings..

Delay OFF—When the air conditioner is on, it can be set to automatically turn off in 1 to

24hours..

How to set:

Press the Delay 1–24hrpad on the unit or the Delay pad on the remote control.. Each touch of the Increase ▲ / Decrease▼pads on the unit or the Increase + / Decrease – pads on the remote control will set the timer in 1-hour intervals.. The Set light will turn on while setting..

To review the remaining time on the Delay 1–24hrtimer, press the Delay 1–24hrpad on the unit or the Delay pad on the remote control.. Use the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease – pads on the remote control to set a new time if desired..

To cancel the timer, press the Delay 1–24hr pad until the light on the Delay 1–24hr pad goes off..

Note: The default temperature reading on the display is degree Fahrenheit ( °F).. To change the display to degree Celcius (°C), press the Temp Increase ▲ and Temp Decrease ▼ buttons together and hold for 3 seconds.. Repeat the process to change back to degree Fahrenheit (°F)

4